OR-Fab 87200 STREET SLIDER SIDE STEP JEEP TJ (NOT UNLIMITED) - Manual (Page 2)

2 Jeep Wrangler & Unlimited - Kits 87200 & 87204
4. At rear slot of ORF rocker panel, loosen nut (3/8”
serrated flange).
5. Install kit side bar between washers
(9/16” ID x 2” OD) and ORF rocker panel.
6. Fasten kit side bar to ORF rocker panel with two kit
bolts (3/8” x 1”) and washers (3/8” USS). DO NOT
tighten.
7. Install kit plate on kit side bar with four kit bolts
(3/8” x 1 1/4 ” stainless button-head) and nuts (3/8”
serrated flange).
8. Align kit side bar parallel with vehicle body.
9. Tighten two kit bolts (3/8” x 1"), nut (3/8” serrated
flange), and nut (1/2” Nylock).
10. Repeat installation for other side of vehicle.
Accessories
The following accessories are also available:
Kit # 83200: Rock Slider Front Bumper
Kit # 83201: Rock Slider Front Bumper
w/ Grille Guard
Kit # 83100: Rock Slider Rear Bumper
Kit Parts List
Qty. Description
4 Bolt, 3/8” x 1"
8 Bolt, 3/8” x 1 1/4 ” stainless button-head
1 Edge guard, 10 1/2 ’
8 Nut, 3/8” serrated flange
1 Plate, diamond Left
1 Plate, diamond Right
1 Side bar, driver side
1 Side bar, passenger side
4 Washer, 3/8” USS
Nut (3/8” Serrated Flange)
ORF
Rocker Panel
Rear Slot
Washer
Kit Side Bar
Front
Kit Side Bar
Kit Bolt (3/8” x 1”),
Washer (3/8” USS) Kit Bolt (3/8” x 1”),
Washer (3/8” USS)
Kit Side Bar
ORF Rocker Panel
Kit Plate
Kit Side Bar
Kit Bolt (3/8” x 1 1/4 ”
Stainless Button-Head),
Nut (3/8” Serrated Flange)
Rev. 03, Copyright 07/06
Performance Automotive Group
www.p-a-g.net