OR-Fab 87025 ROCK DOOR MIRROR RELOCATION BRACKETS - Manual (Page 2)

‘07-UP JK Rock Door Mirror Relocation Kit 2 Kit 87025
a. Install kit mirror mount onto driver rock door
using both 5/16” button head bolts that were pre-
viously removed from hinge. (Note: Kit mirror
mounts are offset for both Dvr & Psg sides; be
sure that the slots are off set toward the front of
the hinge.) .
b. Install O.E. mirror onto kit mirror mount using
kit bolt (8M-1.25 x 20) & washer. .
c. Repeat above substeps for passenger door.
After Completing Installation
Miscellaneous
1. Check all fasteners to ensure they are tight.
2. Ensure all wires, hoses, cables, etc. are properly
connected and there is ample slack.
WARNING
This product is for Off-Road use only. Always make
sure all occupants are wearing seat belts at all times.
Kit Mirror
Mount
5/16” x 1”
Button Head
O. E. Mirror
Kit Bolt
Kit Mirror
Mount
Kit Parts List
Qty. Description
1 Door Mount(driver)
1 Door Mount (passenger)
1 (Hardware bag)
2 Bolt (8M-1.25 x 20)
2 Washer (5/16” USS)
NOTE
All warranty information, instruction sheets, and other
documents regarding the installation of this product
must be retained by the vehicle owner. Information
contained in the instructions and on the warranty card
will be required for any warranty claims. The vehicle
owner needs to understand the modifications made to
the vehicle and how they affect vehicle handling and
performance. Failure to provide the customer with this
information can result in damage to the vehicle and
severe personal injury.