OR-Fab 83662 JEEP TJ FRONT WINCH BUMPER WITH STINGER - Manual (Page 2)

2 Jeep - Kits 83660, 83661, 83662
Install kit
1. Stock front bumper.
a. Unplug foglight harness.
b. Remove four torx bolts and tow hooks.
c. Remove two torx bolts from underside of
bumper.
d. Remove stock bumper from vehicle.
2. Winch. (Skip this step if not installing a winch)
a. Mount winch onto bumper at this time.
3. Front kit bumper.
a. Install kit bumper on frame using six original
fasteners.
b. If equiped, finish installing your winch at this
time.
Kit Parts List
Qty. Description
1 Bumper, front
2 D-Ring, front
NOTE
If you are installing a winch, mount the winch onto the
bumper before installing bumper onto frame rails.
Winch
Copyright 04/10
Performance Automotive Group
www.p-a-g.net