Hale CAFS Attack - Manual (Page 23)

23 CAFS Air Bottle Installer/Operation Guide
p/n: 029-0020-85-0
Rec eiv in g a n d In sp e ctio n
❑
3 Receiving and inspection
3.1 RECEIVING
Before shipping from Class1 the CAFSAttack Compressed Air Foam Pump-
ing System is factory inspected and tested. However, we recommend that
you:
1. Inspect the packaging for any signs of physical damage during shipment. Note
any apparent damage on the bill of lading and request the delivery agent to
sign it. Report the damage to Class1, Ocala, FL. and the shipping company.
2. Verify that the system configuration and options match your purchase order.
Report any discrepancies to Class1.
Class1
A Unit of IDEX Corporation
607 NW 27th Avenue
Ocala, FL 34475 U.S.A.
Telephone . 352-629-5020
Fax ............ 352-629-3569
Web:.......... www.class1.com
Items Furnished
The CAFSAttack system is shipped with all OEM required connections
tagged for easy identification. For a listing of items furnished, see Section
2.1 “Overview,” beginning on page 15.
Also included are the necessary labeling, plates and instruction plates
which must be installed in their appropriate locations to ensure proper per-
sonal and system operating safety.
Items Required, by Builder/Installer
The following items are a sampling of what might be required to complete
the installation, connecting the system to your apparatus. The items
required vary depending on your system configuration. Also see the Foam-
Logix Model 2.1A, 3.3 or 5.0 Manual for additional information.