High pressure indicator, Air bottle open/close valve, Intelli-tank air level indicator – Hale CAFS Attack User Manual
Page 22: Air bottle fill coupling

❑ Description
22
CAFS Air Bottle Installer/Operation Guide
p/n: 029-0020-85-0
HIGH Pressure Indicator
Also see Figure 2-3: “CAFSAttack Operator Control Panel” on page 21.
The HIGH pressure indicator (YELLOW) illuminates when the water/air
pressure is greater than 150 PSI (10 BAR). Pressure in excess of 160 PSI
(11 BAR) is discharged through the safety relief valve.
Air Bottle OPEN/CLOSE Valve
This open/close shut-off valve introduces HIGH air pressure to the system
(0 = CLOSED; I = OPEN).
Intelli-Tank Air Level Indicator
The 4-light air level indicator visually shows the air remaining in the HIGH
pressure air cylinders (bottles). See separate manual, located at the back
of this manual, for additional information.
CAUTION !
SYSTEM MAXIMUM PRESSURE MUST NOT EXCEED 4,500 PSI (311 BAR).
ALSO SEE HEADING “AIR BOTTLE CYLINDERS” ON PAGE 12.
Air Bottle FILL Coupling
The air FILL coupling allows charging of the 4,500 PSI (310 BAR) HIGH
pressure cylinders with a SCBA compressor system.
DANGER !
THE CAFSATTACK AIR BOTTLE FOAM PUMP SYSTEM IS NOT DESIGNED
OR INTENDED TO BE USED AS A “SCBA FILL STATION.” THE CAFS-
ATTACK SYSTEM MUST NOT BE USED FOR OTHER THAN ITS INTENDED
USE.
DO NOT FILL SCBA BOTTLES USING THE CAFSATTACK AIR CYLINDERS AS
YOUR AIR SOURCE.