Class1 EZFill Foam Refill - Manual (Page 11)

Installation ❑
11 EZFill Installer / User Guide, p/n: 029-0020-82-0
3 Installation
3.1 PLUMBING
(See Figure 3-1: ‘Three-Position Valve Plumbing, Single Tank.’)
Figure 3-1: Three-Position Valve Plumbing, Single Tank
IMPORTANT!
WHEN DETERMINING THE LOCATION OF THE EZFILL SYSTEM COMPO-
NENTS BEING INSTALLED KEEP IN MIND PIPING RUNS, CABLE ROUTING
AND OTHER INTERFERENCES THAT COULD HINDER OR INTERFERE WITH
PROPER SYSTEM PERFORMANCE.
Ideally, the EZFill pump/motor assembly should be located in an area that is
protected from road debris and excessive heat buildup. The back of a com-
partment or a compartment shelf is often an ideal location. Access to the
cam-lock, quick disconnect suction hose adapter must be provided on the
operator panel. For bracket dimension layout, see Figure 3-2: “Mounting
Bracket Layout” on page 12.