Class1 EZFill Foam Refill - Manual (Page 40)

Service, Maintenance & Troubleshooting ❑
37 EZFill Installer / User Guide, p/n: 029-0020-82-0
8 Troubleshooting
Figure 8-1: Smart-Switch Troubleshooting LEDs
Indicator LED Condition Result
Backlighting
(Area around switches
backlights WHITE.)
On SOLID Module is on-line and receiving main power.
OFF Module NOT receiving main power
CLASS 1
Logo
On SOLID Foam FILL pump / motor is running
OFF Foam FILL pump / motor is NOT running.
FILL LED On SOLID Foam FILL is active
FLUSH LED On SOLID Foam FLUSH is active
Tank “A” LED On SOLID Foam Tank “A” is selected
Tank “B” LED On SOLID Foam Tank “B” is selected
Table 8-2: LED Indication