Belkin F5D8235-4 User Manual
Page 72
70
N+ Wireless Router
sections
table of contents
1
2
3
4
5
6
8
9
10
7
MaNUally CoNfIgURINg NeTWoRK seTTINgs
Manually Configuring Network settings in Windows 98 or Me
1�
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu .
2�
Select “TCP/IP -> settings” for your installed network adapter . You
will see the following window
(1)
(3)
(2)
3�
If “Specify and IP address” is selected, your Router will need
to be set up for a static IP connection type . Write the address
information in the table below . You will need to enter this
information into the Router .
4�
Write the IP address and subnet mask from the “IP Address” tab
(3) .
5�
Click the “Gateway” tab
(2) . Write the gateway address down in the
chart .
6�
Click the “DNS Configuration” tab
(1) . Write the DNS address(es) in
the chart
7�
If not already selected, select “Obtain IP address automatically” on
the IP address tab . Click “OK” .
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�