Belkin F5D8235-4 - Manual (Page 35)

33
N+ Wireless Router
sections
table of contents 1 2 3 4 6 7 8 9 10 5
alTeRNaTe seTUP MeTHod
setting Custom domain Name server (dNs) settings
A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locaters (URLs) like “www .belkin .com” to IP
addresses . Many Internet Service Providers (ISPs) do not require you to enter this information into the Router . The “Automatic from ISP” box (1)
should be checked if your ISP did not give you a specific DNS address . If you are using a static IP connection type, then you may need to enter a
specific DNS address and secondary DNS address for your connection to work properly . If your connection type is dynamic or PPPoE, it is likely that
you do not have to enter a DNS address . Leave the “Automatic from ISP” box checked . To enter the DNS address settings, uncheck the “Automatic
from ISP” box and enter your DNS entries in the spaces provided . Click “Apply Changes” (2) to save the settings .
(1)
(2)