Belkin F5D8235-4 - Manual (Page 34)

32
N+ Wireless Router
sections
table of contents 1 2 3 4 6 7 8 9 10 5
alTeRNaTe seTUP MeTHod
setting your Connection Type if you are a Telstra® bigPond User [Australia Only]
Your user name and password are provided to you by Telstra BigPond . Enter this information below . Choosing your state from the drop-down menu
(1) will automatically fill in your login server IP address . If your login server address is different than one provided here, you may manually enter the
login server IP address by placing a check in the box next to “User decide login server manually” (4) and type in the address next to “Login Server”
(5) . When you have entered all of your information, click “Apply Changes” (7) . After you apply the changes, the Internet Status indicator will read
“connection OK” if your Router is set up properly .
1� select your state
Select your state from the drop-down menu (1) . The “Login Server” box
will automatically be filled in with an IP address . If for some reason this
address does not match the address that Telstra has given, you can
manually enter the login server address . See “User decide login server
manually” (4) .
2� User Name
Provided by your ISP . Type in your user name here (2) .
3� Password
Type in your password and retype it into the “Retype Password” box (3)
to confirm it .
4� User decide login server Manually
If your login server IP address is not available in the “Select Your
State” drop-down menu (1), you may manually enter the login server IP
address by placing a check in the box next to “User decide login server
manually” (4) and type in the address next to “Login Server” (5) .
(1)
(2)
(3)
(4)
(5)
(7)