Belkin F5D8235-4 User Manual
Page 28
26
N+ Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRNaTe seTUP MeTHod
step 4 Configuring your Router for Connection to your
Internet service Provider (IsP)
The “Internet/WAN” tab is where you will set up your Router to connect
to your Internet Service Provider (ISP) . The Router is capable of
connecting to virtually any ISP’s system provided you have correctly
configured the Router’s settings for your ISP’s connection type . Your ISP
connection settings are provided to you by your ISP . To configure the
Router with the settings that your ISP gave you, click “Connection Type”
(a) on the left side of the screen . Select the connection type you use . If
your ISP gave you DNS settings, clicking “DNS”
(b) allows you to enter
DNS address entries for ISPs that require specific settings . Clicking
“MAC Address”
(C) will let you clone your computer’s MAC address or
type in a specific WAN MAC address, if required by your ISP . When you
have finished making settings, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly .
(B)
(A)
(C)
setting your Connection Type
From the “Connection Type” page, you can select the type of connection
you use . Select the type of connection you use by clicking the button
(1)
next to your connection type and then clicking “Next”
(2) .
(1)
(2)