Belkin F5D8235-4 User Manual

Page 14

N+ Wireless Router

sections

table of contents

CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR

step 1: Hardware Connections

1�

Find the cable connecting your modem and computer* . Unplug it

from the computer and plug it into the yellow port on the Belkin

Router .

2�

Connect the new cable (provided in the box) to any gray port on

the Router . Plug the other end into a network (Ethernet) port on

your computer .

3�

Plug the power supply into a wall outlet, and the other end into the

black port on the Belkin Router . As the Router wakes up, lights will

come on; recheck your connections if the “Wired” and “Router”

lights are not a steady blue after 20 seconds .

4�

Rotate the antennas up .

5�

Locate the CD in this guide and insert it into your computer . The

Setup Wizard should appear automatically . If it doesn’t, open

the CD in My Computer (Windows) or the Finder (Mac OS X) and

double-click the “Router Setup” icon .

*If you are replacing an existing router, find the cable connecting the modem and old router .
Disconnect it from the old router and plug it into the yellow port on the new router .

LAN

WAN