Belkin F5D8235-4 User Manual
Page 68
66
N+ Wireless Router
sections
table of contents
1
2
3
4
5
7
8
9
10
6
UsINg THe Web-based adVaNCed UseR INTeRfaCe
Manually Configuring Network settings
Set up the computer that is connected to the cable or DSL modem FIRST
using these steps . You can also use these steps to add computers to
your Router after the Router has been set up to connect to the Internet .
Manually Configuring Network settings in Mac os up to 9�x
1�
Pull down the Apple menu . Select “Control Panels” and select
“TCP/IP” .
2�
You will see the TCP/IP control panel . Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1) .
3�
Next to “Configure”
(2), if “Manually” is selected, your Router
will need to be set up for a static IP connection type . Write the
address information in the table below . You will need to enter this
information into the Router
) .
4�
If not already set, at “Configure:”, choose “Using DHCP Server” .
This will tell the computer to obtain an IP address from the Router .
5�
Close the window . If you made any changes, the following window
will appear . Click “Save” .
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
(1)
(2)