Brother HL 2700CN - Manual (Page 91)

4 - 3 OPTIONS
3
Remove the paper tray from the lower tray unit.
Figure 4-2
4
Remove the protective parts and then put the paper tray back in the lower tray unit.
Figure 4-3
5
Check the two alignment pins on the lower tray unit. Use two people to lift the printer and place it
on top of the lower tray unit. Make sure you use the handholds at the bottom four corners of the
printer. Check that the pins are properly inserted into the printer. Check that the connector is
inserted.
Figure 4-4