Brother HL 2700CN - Manual (Page 77)

3 - 20 CONTROL PANEL
Set IP address
Press the + or - button until the NETWORK menu appears (and to
display each setting shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number is blinking.
Press the + or - button to increase or decrease the number.
Press the Set button to go to the next number.
Repeat this process until you have set your IP address.
Press the Set button to complete the IP address.
An asterisk appears at the end of the display.
--MENU--
INFORMATION
--MENU--
NETWORK
NETWORK
TCP/IP
TCP/IP
TCP/IP ENABLE
TCP/IP
IP ADDRESS=
IP ADDRESS=
192.0.0.192 *
2
IP ADDRESS=
123.0.0.192
0
IP ADDRESS=
123.45.67.89
9
IP ADDRESS=
123.45.67.89
*