Brother HL 2700CN - Manual (Page 115)

5 - 10 ROUTINE MAINTENANCE
OPC belt cartridge
Replace OPC belt cartridge message
When the OPC belt cartridge runs out, the following message appears on the LCD. When you see this
message, you must replace the OPC belt cartridge:
Replacing the OPC belt cartridge
1
Turn off the printer power switch.
2
Open the top cover of the printer.
Figure 5-8
3
To release the lock, push the green belt cartridge lock levers on both sides inwards.
Figure 5-9
■
Do not touch the surface of the OPC belt cartridge. If you touch it, it could degrade print quality.
■
Do not expose the OPC belt cartridge to light (more than 800 lux) for more than 2 minutes. This
could degrade print quality.
■
Damage caused by improper handling of the OPC belt cartridge may void your warranty.
REPLACE OPC BELT
READY