Brother HL 2700CN - Manual (Page 117)

5 - 12 ROUTINE MAINTENANCE
7
Put the new OPC belt cartridge into the printer guides with the flat side facing you.
Figure 5-13
8
To lock the cartridge into the printer, push the belt cartridge lock levers that are on both sides of the
OPC belt cartridge outwards.
9
Close the top cover.
10
Turn the printer power switch back on.
11
Press any of the Menu buttons ( + , – , Set or Back ) to take the printer off line.
12
Press + or – until RESET MENU appears.
13
Press Set to proceed to the next menu level, and then press + or – until PARTS LIFE appears.
14
Press Set , and then press + until OPC BELT appears.
15
Press Set . The printer is now in the READY state.