Philips DVT5500-00 - Manual (Page 51)

51 Settings Table of contents
9.3.4 AUTO-OFF
The device switches off automatically if no key is pressed within a pre-
set period of time. This saves power.
1 In stop mode (start-up screen), press MENU.
2 Press h / b to select the device settings menu Õ.
3 Press + / – to select the
Auto off
function.
4 Press the record key, g, to confirm.
5 Press + / – to automatically turn off the device after 5 or 15
minutes of inactivity.
6 Press the record key, g, to confirm.
7 Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.5 Alarm clock
You can use the device as an alarm clock or an appointment reminder.
The alarm goes off or a selected file is played at a pre-set time.
1 In stop mode (start-up screen), press MENU.
2 Press h / b to select the device settings menu Õ.
3 Press + / – to select the
Alarm
function.
4 Press the record key, g, to confirm.
5 Press + / – to select the
Set time
function to set the alarm clock.
6 Set date and time as described (see also chapter 9.3.1 Set date &
time, page 49) .
7 Press the record key, g, to confirm.
8 Press + / – to select the
Set source
function to set the alarm clock
signal.
9 Press + / – to select between an alarm signal, selected recording, or
a pre-set radio station to be played as an alarm sound.
10 Press the record key, g, to confirm.
X If this feature is on, the ¿ icon will be displayed.