Philips DVT5500-00 - Manual (Page 48)

48 Settings Table of contents
9.2 Display settings
9.2.1 Select language
Note
• Your language might not be available. Select an alternative one.
1 In stop mode (start-up screen), press MENU.
2 Press the h / b key to select the display settings menu Ô.
3 Press + / – to select the
Language
function.
4 Press the record key, g, to confirm.
5 Use the + / – keys to select the display language you want.
6 Press the record key, g, to confirm.
7 Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.2.2 Adjusting the display contrast
1 In stop mode (start-up screen), press MENU.
2 Press the h / b key to select the display settings menu Ô.
3 Press + / – to select the
Contrast
function.
4 Press the record key, g, to confirm.
5 Press h / b to select the required display contrast.
6 Press the record key, g, to confirm.
7 Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.2.3 Enable/disable the back lighting (DVT3000 – DVT7000)
1 In stop mode (start-up screen), press MENU.
2 Press the h / b key to select the display settings menu Ô.
3 Press + / – to select the
Backlit
function.
4 Press the record key, g, to confirm.