Philips DVT5500-00 - Manual (Page 42)

42 Settings Table of contents
5 Press + / – to select the required recording quality.
X The selected microphone/recording sensitivity icon will be
displayed.
°
–
Dictation
– optimized setting for the recording of a sound
source close to the device.
±
–
Speech to text
– optimized recording for subsequent editing
using speech recognition software.
¯
–
Conversation
– optimized setting for the recording of multiple
sound sources in close proximity to the device.
²
–
Auto Zoom
(DVT5000 – DVT7000) – automatic adjustment
of the zoom function for a sound source at a larger distance.
µ
–
Lecture
– optimized setting for the recording of a sound
source at a larger distance.
·
–
Long distance
(DVT5000 – DVT7000) – optimized setting for
the recording of sound sources up to 15 meters / 50 feet away.
¸
–
Manual setting
(DVT3000 – DVT7000) – set the
microphone/recording sensitivity manually. Press h / b to select
the sensitivity level from 1 (lowest sensitivity, very close) to 9
(highest sensitivity, far away). Press
+ / – during recording to adjust
the microphone/recording sensitivity.
6 Press the record key, g, to confirm.
7 Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.5 Enable/disable wind filter (DVT3000 – DVT7000)
You can also enable the wind filter function to reduce the noise
produced by the wind if you need to make a recording outdoors.
1 In stop mode (start-up screen), press MENU.
2 Press the h / b key to select the record settings menu Ó.
3 Press + / – to select the
Wind filter
function.
4 Press the record key, g, to confirm.
5 Press + / – to enable/disable the function.
6 Press the record key, g, to confirm.
7 Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.