Philips DVT5500-00 - Manual (Page 35)

35 Edit & delete Table of contents
7 Edit & delete
You can overwrite part of a recording or insert a new one. You can
split a large recording into separate files so that it can be easily edited.
You can delete individual recordings from the device.
7.1 Edit a recording
7.1.1 Add to or overwrite a recording
You can edit an existing recording by overwriting a part of it or adding
a new recording at its end. You can use the Overwrite mode to delete
the existing recording from its current position!
Note
• When you edit, the recording quality of the original recording is
used.
1 Set the required editing mode (see also chapter 9.1.7 Setting
editing mode, page 43) .
X The selected editing mode icon will be displayed.
Å – add a recording
Æ – overwrite a recording
Caution
• You can use the Overwrite mode to delete the existing recording
from its current position!
2 Press the INDEX/a button while the device is stopped (start-up
screen) to select a folder in which you wish to edit a recording.
Note
• DVT3000 – DVT7000: You can not edit the files in the music
folder (y/ä).
3 Press h / b to select the recording that you wish to edit.
4 Overwrite a recording: Play the recording up to the point
where you wish to add a new part; use the quick search function
or press h
/ b to jump to an index mark.
5 Press the e key to pause playback.
6 Press the g key to start recording the new part.
X The new file overwrites the rest of the recording or is added
to its end, according to the editing mode set.
7 Press g to pause recording.
8 Press the j key to stop recording.
X The device returns to stop mode.