Philips DVT5500-00 - Manual (Page 19)

19 First steps Table of contents
4.4 Initial installation process
The initial installation process starts when first using the device or
possibly if there has been a long interruption to the power supply. The
date and time entered are saved with each recording as the recording
time.
4.4.1 Select language
1 Use the + / – keys to select the display language you want.
2 Press the record key, g, to confirm.
Note
• Your language might not be available. Select an alternative one.
4.4.2 Set date & time
1 Press + / – to set the year.
2 Press b
.
3 Press + / – to set the month.
4 Press b
.
5 Press + / – to set the day.
6 Press b
.
7 Press + / – to switch between the 12/24-hour system.
8 Press b
.
9 Press + / – to set the hours.
10 Press b
.
11 Press + / – to set the minutes.
12 Press the record key, g, to confirm.
Tip
• You can change the language, date and time at any time using the
settings menu (see also chapter 9.2.1 Select language, page 48) (see
also chapter 9.3.1 Set date & time, page 49) .
4.5 Show recording and device information
1 Press the stop key in the stop mode (start-up screen) j.
a The display shows the properties of the selected recording:
Symbol for the storage location, recording date and time,
recording quality, recording length, and file size in megabytes.