Philips DVT5500-00 - Manual (Page 20)

20 First steps Table of contents
b The display shows general device-related data: Date and time,
remaining recording time in the selected memory, firmware
version of the device.
2 Press the stop key j to return to the stop mode.
4.6 Enable/disable the keypad lock
The keypad lock deactivates all keys on the device. The timer function
of the device continues to function.
1 Slide the HOLD switch up into the HOLD position to lock the
keypad of the device.
X The display briefly shows ‘On Hold’ and turns off.
2 Slide the HOLD switch down to the Off position to disengage the
keypad lock.
X The display briefly shows ‘Off Hold’ and turns off.
4.7 Insert microSD card
Caution
• Do not remove the memory card while recording is in progress. If
you do this, data may be damaged or lost.
1 DVT3000 – DVT7000: Flip the memory card slot cover to the
side.
2 Insert the microSD card into the card slot with the contacts facing
upwards.
3 Insert the memory card until it snaps into place.
4 To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.