Philips DVT5500-00 - Manual (Page 37)

37 Radio DVT5000 – DVT7000 Table of contents
8 Radio DVT5000 – DVT7000
Note
• The headphones are the device's antenna. Radio reception is only
possible if headphones are connected to the device.
8.1 Radio mode
1 Connect the headphones to the device. (see also chapter 4.11.1
How to connect headphones, page 22) .
2 Press and hold the MENU key for at least 2 seconds to enter the
radio mode.
3 Press h / b to select the required frequency. OR:
Press and hold h / b to start seeking for the next radio station.
4 Press the + / – buttons to adjust the volume.
5 Press and hold the MENU key for at least 2 seconds to exit the
radio mode.
Tip
• Press F1 to exit the radio mode.
Tip
• You can also use Menu to enter/exit the radio mode.
a In stop mode (start-up screen), press MENU.
b Press h / b to select the radio menu Ö.
c Press + / – to select the
FM radio on
and
Off
function.
d Press the record key, g, to confirm.
8.2 Pre-set radio station
The radio can store up to 20 radio stations in pre-sets.
Tip
• Press F2 to search for a radio station.
8.2.1 Saving radio stations automatically
1 Press MENU while the device is in the radio mode.
2 Press + / – to select the
Station search
function.