Blount ICS 613GC - Manual (Page 54)

© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
52
16. FLYWHEEL
16.4 Using pliers, hold saw up by magnet
counterweight.
16.5 Strike flywheel removal tool with
a ball peen hammer. The flywheel
should release from crankshaft.
16.6 Inspect and clean flywheel. Replace
if any of the fins are broken.
16.7 Inspect woodruff key.
16.8 Install flywheel, plain washer, wave
washer, and flywheel nut.
A Torque nut to 217 in-lbs. (25 Nm).