Blount ICS 613GC - Manual (Page 21)

F/N 71537 Oct 07 © 2007 ICS, Blount Inc.
TITLE 613GC SERVICE MANUAL
19
7. CLUTCH & RIM SPROCKET
7 This section covers clutch
removal, rim sprocket removal,
inspection, and assembly. Refer
to sections 5 and 6 if needed.
7.1 Insert piston stop tool into spark plug
hole.
7.2 Pull starter handle until piston stops
against tool.
7.3 Remove clutch.
Left hand threads – rotate
clockwise to loosen.
NOTE: If an impact wrench is available
steps 7.1 and 7.2 do not have to
be performed.