Blount ICS 613GC User Manual

Page 38

Text mode
Original mode

F/N 71537 Oct 07

TITLE

613GC SERVICE MANUAL

12. CARBURETOR

This section covers the
removal and installation of the
carburetor. Removal of the air
intake components and cylinder
cover is required. Please refer
to sections 5 and 10 or 11 if
necessary. Carburetor tuning is
covered in section 23.

12.1 Remove throttle linkage.

A Push trigger end out of rear handle.
B Pivot linkage around.
C Remove carburetor end of linkage

from throttle rod tab on carburetor.

NOTE: All saws are equipped with
carburetor model # WJ-85A.

12.2 Remove choke lever split pin.
12.3 Remove choke lever.
12.4 Remove adjustment screw boot.