Blount ICS 613GC User Manual

Page 40

Text mode
Original mode

F/N 71537 Oct 07

TITLE

613GC SERVICE MANUAL

13. CYLINDER & PISTON

This section covers the
disassembly, inspection and
assembly of the cylinder, piston
and related components.
Removal of several component
groups is required. Refer to
sections 5, 6, 10, and 12 if
necessary.

13.1 Remove carburetor base screws.

A Remove carburetor base from rear

manifold.

B Remove carburetor base from pulse

tube.

13.2 Remove pulse tube and protective

spring from cylinder base.

NOTE

When replacing the 613GC cylinder

and piston it is necessary to tune the
carburetor prior to returning the saw to
service (see section 23).