Blount ICS 613GC User Manual

Page 35

F/N 71537 Oct 07

TITLE

613GC SERVICE MANUAL

10. CYLINDER COVER

10.13 Install cylinder cover.

A Pull spark plug lead into slot in

cylinder cover.

B Align throttle linkage with cylinder

cover and crankcase.

C Push the cylinder cover down on the

crankcase, guide intake manifold into
cylinder cover.

D Install the cylinder cover screws. Use

blue Loctite

. Torque to 35 in-lbs.

(4.0 Nm).

E Install fuel tank breather and clamp.

10.14 Install air filter mount.

A Guide carburetor compensating tube

through air filter mount. Make sure
manifold sits flat over lip on cylinder
cover.

B Install air filter mount screws (3) using

blue Loctite

C Torque to 43 in-lbs. (4.9 NM).

10.15 Install air filters and cover.

A Install pre-filter
B Install clean air filter
C Install air filter flange and tighten
D Install air filter cover and tighten