And guard flap – Blount ICS 613GC User Manual

Page 31

F/N 71537 Oct 07

TITLE

613GC SERVICE MANUAL

9. WALLWALKER

This section covers the removal,
inspection, and assembly of the
WallWalker

and guard flap.

9.1

Inspect WallWalker

tip.

A If the tip is worn, as shown, replace.

9.2

Remove crankcase screws and wave
washers.

9.3

Remove WallWalker

from saw.

NOTE: On late model saws it is

necessary to remove the bar
plate prior to removing the
crankcase screws.

9.4

Remove guard flap screws and
washer.

9.5

Remove and inspect guard flap.

A Replace the flap if it is torn or

damaged in any way.