Blount ICS 613GC User Manual
Page 51
F/N 71537 Oct 07
© 2007 ICS, Blount Inc.
TITLE
613GC SERVICE MANUAL
49
15. IGNITION COIL
15
This section covers the removal,
inspection, and installation of
the ignition coil. Removal of
the starter is required. Refer to
section 8 if necessary.
15.1 Remove starter flywheel shroud by
unhooking wires.
15.2 Remove ignition coil screws, wave
washers and plain washers.
15.3 Remove ignition coil.
15.4 Inspect.
A Look for cracks/missing insulation.
B Clean flywheel magnets and coil if
rusty.