Blount ICS 613GC - Manual (Page 48)

© 2007 ICS, Blount Inc. F/N 71537 Oct 07
TITLE 613GC SERVICE MANUAL
46
13. CYLINDER & PISTON
13.27 Install carburetor base.
A Slip pulse tube into carburetor base.
B Slip rear manifold into carburetor
base.
C Make sure rear manifold lip is flat.
13.28 Install carburetor base screws.
A Use blue Loctite ® on 3 screws without
ground wire.
B Make sure to include stop switch
wire.
C Torque to 35 in-lbs. (4 Nm).