Brocade Communications Systems Brocade ICX 6650 53-1002599-01 - Manual (Page 12)

xii Brocade ICX 6650 Hardware Installation Guide
53-1002599-01
Brocade ICX 6650 slot and Ethernet port numbering
• Slot 2 is located on the back of the ICX 6650 device and contains ports 1 through 3 on the top
row and port 4 on the bottom row. These ports are 2x40 GbE QSFP+. Refer to the following
figure.
• Slot 3 is located on the back of the ICX 6650 device and contains ports 1 through 8. These
ports are 4 x 10 GbE breakout ports and require the use of a breakout cable. Refer to the
previous figure.
How this document is organized
The document contains the following components:
• Chapter 1, “Brocade ICX 6650 Overview” provides an overview of the Brocade ICX 6650.
• Chapter 2, “Installing the Brocade ICX 6650” provides the information needed to install the
switch in your network.
• Chapter 3, “Configuring the Brocade ICX 6650” lays out the tasks and commands necessary to
get the switch up and running.
• Chapter 4, “Brocade ICX 6650 Operation” discusses the day-to-day operational procedures for
using the switch.
• Chapter 5, “Managing the Brocade ICX 6650” describes how to manage temperature settings,
remove MAC addresses, and provides procedures for removing and replacing the
field-replaceable units (FRUs), including the fan assemblies and power supplies.
• Appendix A, “Brocade ICX 6650 Specifications” provides tables of physical, environmental, and
general specifications.
• Appendix B, “Brocade ICX 6650 Regulatory Statements” provides a list of the regulatory
statements for safety compliance.
• Appendix C, “Brocade ICX 6650 Cautions and Danger Notices” provides a list of the
international caution and danger statements for safety compliance.
Slot 2
Slot 2 Slot 3