Bosch D1260 - Manual (Page 59)

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
Bosch Security Systems | 9/04 | 50410D 59
5. If the card is accepted, the display changes to
either
Card added. or Card changed if the card
already exists in your system.
Pressing the soft key exits out of this
function and returns the display to idle text.
Pressing the
Next> soft key exits out of this
function and returns the display to either
Add/Change Level.
Add/Change Sub-User ID
For each user in the system, there can be up to four
access cards; one Master User (assigned in the
Card>
prompt) and up to three sub-users.
1. Pressing the Sub-User> soft key will allow you to
add/change a user’s Sub-User access card or
credential.
2. The display changes to User 123 Add/Change
Sub-User IDs? to add or change any of this user’s
sub-user IDs.
Pressing the Yes> soft key will jump to Step 3.
Pressing the No> soft key will jump to
Add/Change Passcode.
3. The display changes to Select Sub-User:
Press the soft key to add or change
sub-user 1.
Press the
soft key to add or change
sub-user 2.
Press the
soft key to add or change
sub-user 3.
Press the
Exit> soft key to return to the main Add
/ Change User display.
4. If adding or changing a sub-user and a card reader
is connected to your system, the display changes to
Add (or Change ) Sub-User 1: Present card to
card reader now.
If the display changes to D9210 not ready , contact
your security company.
If 20 seconds elapse without pressing a key the
display returns to idle text. Pressing the
soft
key exits out of this function and returns the
display to the main
Add / Change User display.