Bosch D1260 - Manual (Page 36)

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)
36 Bosch Security Systems | 9/04 | 50410D
• FRONT DOOR is already bypassed.
indicates that the point has already been
bypassed.
• FRONT DOOR cannot by bypassed.
indicates the system is programmed not to
allow that point to be bypassed.
• Invalid point Please try again. indicates that
the entered point doesn’t exist and the display
returns to allow another point to be entered.
• No additional points. indicates that there are
no more points that can be bypassed.
6. You can return to idle text by pressing
7. If you are attempting to unbypass a 24-Hour or
Fire Point that is still faulted, the keypad will
display
Cannot unbypass 24hr faulted points.
SEND REPORT ? (COMMAND + 4+1 or
4+2)
Description
This function tests the communication link between
your security system and your security company. It is
an important part of maintaining a high level of
security for your property.
Two types of test reports may be sent. The first type of
report is a simple test report (Command 41). The
second type of report is a status report (Command 42).
This status report indicates the current condition of
your system.
Using Send Report
1. Always call your security company before sending
a test report.
2. The display shows disarmed idle text.
Press the COMMAND key. The display shows
*System Command* .
3. Press the 4 key then the 1 key to send a test report.
Press the 4 key then the 2 key to send a status
report.