Bosch D1260 - Manual (Page 23)

D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR DELAY ? (COMMAND + 3)
Bosch Security Systems | 9/04 | 50410D 23
PERIMETR DELAY ? (COMMAND + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only
arm the perimeter and exit through a door
programmed for exit delay. The interior of the building
remains disarmed. People or pets are free to move
throughout the interior of the premises.
This function is also useful in commercial systems
when you are working before or after business hours
and wish to have the perimeter armed. Other system
users can enter through doors programmed for entry
delay, which will start the entry delay sounder and
countdown.
Using Perimeter Delay
1. Interior points are not armed with this command
and may remain faulted while arming with
COMMAND 3.
2. Press the COMMAND key.
The display shows *System Command* .
3. Press the 3 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu,
then press NEXT> soft key repeatedly.
until you reach the PERIMETR DELAY ?>
prompt, then press the adjacent soft key.
4. The display shows Exit now! # (# = exit delay
time remaining).
After the exit delay expires, Perimeter On
Delayed is displayed.
5. To disarm your security system, enter your
personal passcode and press
ENTER.
The display then returns to idle text.