Brother DCP-165C - Manual (Page 80)

72
Cleaning the scanner
B
a
Lift the document cover (1). Clean the
scanner glass (2) and white plastic (3)
with a soft lint-free cloth moistened with
a non-flammable glass cleaner.
b
(DCP-185C only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft lint-free
cloth moistened with a non-flammable
glass cleaner.
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
Cleaning the machine printer
platen
B
WARNING
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen (1).
If ink is scattered on or around the printer
platen, wipe it off with a soft, dry, lint-free
cloth.
a
Lift the scanner cover until it locks
securely into the open position.
b
Clean the machine printer platen (1).
2
1
3
1
2
1