Brother DCP-165C - Manual (Page 22)

Chapter 2
14
Handling and using print
media
2
„ Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
„ Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
„ Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
„ You can only print on both sides of the
paper with PC printing. See Printing for
Windows
®
in the Software User’s Guide
on the CD-ROM.
Improper Setup
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1 2 mm or greater
• Extremely shiny or highly textured paper
• Paper that cannot be arranged uniformly
when stacked
• Paper made with a short grain
Paper capacity of the output paper
tray
2
Up to 50 sheets of 20 lb Letter or 80 g/m
2
A4
paper.
„ Transparencies or photo paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
1
1