Brother DCP-165C - Manual (Page 14)

Chapter 1
6
Control panel overview
1
The DCP-145C, DCP-163C, DCP-165C, DCP-167C, and DCP-185C have the same control panel
keys.
1 Copy keys:
Lets you temporarily change the copy settings
when in copy mode.
„ Copy Options
You can quickly and easily select
temporary settings for copying.
„ Enlarge/Reduce
Lets you enlarge or reduce copies
depending on the ratio you select.
„ Copy Quality
Use this key to temporarily change the
quality of your copies.
„ Number of Copies
Use this key to make multiple copies.
2 Menu keys:
„ Menu
Lets you access the main menu.
„ +a or -b
Press to scroll through the menus and
options.
„ OK
Lets you select a setting.
3 Stop/Exit
Stops an operation or exits from a menu.
4 Start keys:
„ Mono Start
Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
„ Colour Start
Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scanning
setting in the ControlCenter software).
5 On/Off
You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality.
6 Ink Management
Lets you clean the print head, check the print
quality, and check the available ink volume.
7 Scan
Lets you access Scan mode.
1
10 9
2 3
6 7 8 5
4
100% Normal 01 _