Brother DCP-165C - Manual (Page 76)

68
f
Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover (1) until it locks securely
in the open position.
Make sure that there is no jammed
paper left inside the machine under the
plastic covers. Check both ends of the
print carriage.
Note
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head has stopped in the right
corner as shown in the illustration, you
cannot move the print head. Hold down
Stop/Exit until the print head moves to the
middle. Then unplug the machine from the
power source, and take out the paper.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
h
Slowly push the paper tray completely
into the machine.
Note
Make sure you pull out the paper support
until it clicks.
1
1
2 3