Brother DCP-165C - Manual (Page 27)

19
3
3
LCD screen
3
Changing LCD language
3
You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
0.Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Improving the LCD angle
3
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
Sleep Mode
3
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose 3.Sleep Mode.
Press OK.
d
Press a or b to choose 1 Min, 2 Mins,
3 Mins, 5 Mins, 10 Mins, 30 Mins
or 60 Mins which is the length of time
the machine is idle before entering sleep
mode.
Press OK.
e
Press Stop/Exit.
General Setup
3