Brother DCP-165C - Manual (Page 71)

Troubleshooting and Routine Maintenance
63
B
Error and Maintenance messages
B
As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error and maintenance messages are
shown below.
You can correct most errors and routine maintenance messages by yourself. If you need more
help, the Brother Solutions Center offers latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Error Message Cause Action
B&W Print Only One or more of the colour ink
cartridges is empty. While this
message appears on the LCD,
each operation works in the
following way:
„ Printing
If you click Greyscale in the
Advanced tab of the printer
driver you can use the machine
as a monochrome printer for
approximately four weeks
depending on the number of
pages you print.
„ Copying
If the paper type is set to Plain
Paper, Inkjet Paper or
Transparency you can make
copies in monochrome.
If the paper type is set to Other
Glossy or Brother BP71, the
machine will stop all print
operations. If you unplug the
machine, or take out the empty ink
cartridge, you cannot use the
machine until you change to a new
ink cartridge. Replace the empty ink
cartridges. (See Replacing the ink
cartridges on page 69.)
Replace the empty ink cartridges. (See
Replacing the ink cartridges on page 69.)
Cannot Detect You installed a new ink too fast and
machine didn’t detect it.
Take out the new ink cartridge and reinstall it
slowly until it clicks.
If you are using non Brother
Original Ink the machine may not
detect the ink cartridge. Replace the cartridge with a Brother Original Ink
Cartridge. If the error remains, contact your
Brother dealer.
An ink cartridge is not installed
correctly. Take out the new ink cartridge and re-install it
slowly until it clicks. (See Replacing the ink
cartridges on page 69.)