Bryant R-22 User Manual

Page 11

6. Lift top cover from unit.

7. Reverse sequence for reassembly.

VI.

REMOVE FAN-MOTOR ASSEMBLY—AFTER 1/1/92

NOTE:

This section applies to all Reliant products made after

January 1, 1992

1. Perform items 1, 3, 4, and 5 above. (Note item 2 is not

required.)

2. Remove 4 screws holding wire basket to top cover.

3. Lift wire basket from unit.

4. Remove nuts holding fan motor to wire basket.

5. Remove motor and fan blade assembly.

6. Pull wires through wire raceway to change motor.

7. Reverse sequence for reassembly.

8. Prior to applying power, check that fan rotates freely.

Fig. 7—Application with Air Conditioner or Heat Pump Installed Above Indoor Unit

A90077

HEAT PUMP ONLY

150' MAX.

—11—