Brother MFC J6910DW - Manual (Page 78)

64
11
Scanning a document
11
There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User’s Guide.)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User’s
Guide.)
b
Load your document. (See How to load
documents on page 28.)
 Use the ADF to scan multiple pages
of documents or 2-sided documents.
It feeds each sheet automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the SCAN key, go to
Scanning using the SCAN key.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
Scanning using the
SCAN key
11
For more information, see Using the Scan
key in the Software User’s Guide.
a
Press (SCAN).
b
Choose the SCAN mode you want.
 to File
 to Media
 to Network
 to FTP
 to Email
 to OCR
1
 to Image
1 (Macintosh users)
This function is available after you download
and install Presto! PageManager from
http://nj.newsoft.com.tw/download/brother/
PM9SEInstaller_BR_multilang.dmg
c
(For network users)
Choose the computer you want to send
the data to.
d
Press Start to begin scanning.
Scanning using a
scanner driver
11
For more information, see Scanning a
document using the TWAIN driver or
Scanning a document using the WIA driver in
the Software User’s Guide.
a
Start a scanning application and click
the Scan button.
b
Adjust the settings such as Resolution,
Brightness and Scan Type in the
Scanner Setup dialog box.
c
Click Start or Scan to begin scanning.
How to scan to a computer
11