Brother MFC J6910DW - Manual (Page 52)

Chapter 5
38
Receive Mode settings
5
Ring Delay
5
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, keep the Ring Delay setting of
4 rings.
(See Using external and extension
telephones on page 47 and Easy Receive
on page 39.)
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Ring Delay.
g
Press Ring Delay.
h
Press the number of times the machine
will ring before it answers (0, 1, 2, 3 or
4).
If you choose 0, the machine will answer
immediately and the line will not ring at
all.
i
Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only)
5
When somebody calls your machine, you and
your caller will hear the normal telephone
ring. The number of rings is set by the Ring
Delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T Ring (a fast
pseudo/double-ring) for the time you have set
in the F/T Ring Time setting. If you hear the
F/T Ring it means that you have a voice caller
on the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring; however, you can still answer the
call on any telephone. (For more information
see Using remote codes on page 48.)
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
F/T Ring Time.
g
Press F/T Ring Time.
h
Press how long the machine will ring to
alert you that you have a voice call (20,
30, 40 or 70 seconds).
i
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.