Brother MFC J6910DW - Manual (Page 27)

Loading paper
13
2
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks, and then unfold the paper
support flap (2).
Note
Before you shorten Tray #1, take the paper
out of the tray. Then shorten the tray by
pressing the universal guide release
button (1). Adjust the paper length
guide (2) to fit the paper size you are going
to use. Then put the paper in the tray.
Loading paper in paper
tray #2
2
Note
• You can only use plain paper sizes
Ledger, Letter, Legal, Executive, A3 or A4
in Tray #2.
• When you use the Borderless printing
feature paper must be fed from Tray #1.
a
Pull the paper tray completely out of the
machine.
Note
• If you are using Ledger, Legal or A3 size
paper, press the universal guide release
button (1) as you slide out the front of the
paper tray until it clicks.
• You can check if the length of the tray is
adjusted properly by opening the paper
tray cover.
1
2
1
2
1