Brother WL660 - Manual (Page 19)

CHAPTER 2 PAPER HANDLING
2–1
English
CHAPTER 2
PAPER HANDLING
PAPER SPECIFICATIONS
The printer can handle paper that conforms to the following specifications:
Paper Type Paper Size Paper Weight Sheet
Feeder
Manual
Cut sheet A4, Letter, Legal, B5, A5,
Executive, Custom size
70-216 x 127-356 mm,
2.75”-8.5” x 5”-14” ● ●
Envelopes DL, C5, COM-10,
Monarch 60-135 g/m 2
(16-36 lb.)
● ●
Organizer Day-Timer ® J, K, L, M
70-216 x 127-356 mm
2.75”-8.5” x 5”-11”
● ●
Labels
Transparencies 70-216 x 127-356 mm,
2.75”-8.5” x 5”-14” ●
Paper Capacity in Feeder
Multi-purpose
Sheet Feeder :
Up to 22 mm (0.87 inch) in Height ( below the mark ▼. )
Approx. 200 sheets of 75 g/m
2 (20 lb.) A4/Letter paper or 10
envelopes
Output Tray : Approx. 100 sheets of 75 g/m 2 (20 lb.) A4/Letter paper
Remarks It is recommended that you test paper, especially special sizes and types of
paper, on this printer before purchasing large quantities.
Avoid feeding labels with carrier sheets exposed or your printer will be
damaged. Do not feed label sheets through the printer more than once.
Use a recommended type of paper, especially plain paper and
transparencies, for optimum printing. For more information on paper
specifications, consult your nearest authorized sales representative or the
place where you purchased your printer.
We recommend you use labels or transparencies which are designed for
laser printers.
We recommend you use long-grained paper for the best print quality.
If the paper will not load from the multi-purpose sheet feeder, use the
manual feed slot and try again.