Brother 580C - Manual (Page 83)

79
Eight different typeface, or fonts, are available on this machine. The fonts are:
F1 (Helsinki) TITLE F2 (Calgary)
F2 (Brussels) TITLE F3 (Florida)
F3 (Bermuda) TITLE F4 (Istanbul)
TITLE F1 (San Diego) TITLE F5 (US)
The default setting is font F1.
+
The TITLE fonts are only available if the message consists of only one line
or if 1/2” (12-mm)-, 3/4” (18-mm)-or 1” (24-mm)-wide tape is installed.
In addition, letters entered using a TITLE font will only appear in uppercase.
TO ENTER TEXT WITH A DIFFERENT FONT:
(1) Insert the cursor where you wish to begin using a new font.
(2) Press the FONT key until the sample character is displayed in the font you wish
to use and your desired font is shown by the indicators above the LCD display.
(3) Enter the text to which the chosen font is no be applied.
TO APPLY A FONT TO A SELECTED AREA:
(1) Press the AREA key, then use the cursor keys to select the text to which you
want to apply a new font.
(2) Press the FONT key until the text is displayed in the font you wish to use and
your desired font is shown by the indicators above the LCD display.
(3) Press the RETURN key to apply the chosen font to the selected text.