Brother 580C - Manual (Page 56)

52
This machine has many special marks and symbols that can be entered into
your text. When entered, they act like normal characters and can be both
edited and deleted.
Though several symbols can be found on the machine’s key tops, 126 addi-
tional marks are available in Symbol mode.
TO ENTER A NON=KEYTOP SYMBOL:
(1) Hold down the CODE key and press the SYMBOL key to enter Symbol mode.
(2) Press the
5 and 6 keys until the symbol you wish to enter appears on the
display.
(3) Press the
4 and 3 keys until the symbol is highlighted.
(4) Press the RETURN key to enter the symbol into your message.
+
To enter a sequence of symbols, select a symbol, then hold down the
CODE key and press the RETURN key. Continue selecting symbols in
this way and press just the RETURN key after the last symbol in the
sequence is chosen.
The 126 symbols in Symbol mode cannot be entered in a bar code.