Buffalo Technology TeraStation HS-DTGL/R5 - Manual (Page 79)

7
Replacing a Hard Drive
17
Reassembly is the reverse of dissassembly.
.
18
Reconnect cables and power to your TeraStation.
19
Login to the TeraStation’s Web-based configuration tool.
20
Click the error link on the first page of the management interface.
21
Follow the steps shown in the manager to rebuild the RAID Array.
The TeraStation should now be back in the state it was prior to the hard drive failure. If you were
using RAID 5 or RAID 1, your data should be restored.